Step 1
Park the Acura MDX on level ground. beginning the car and let it run a few minutes until the radiator fan come on. Turn off the vehicle.
Step 2
Remove the transmission dipstick, which has a yellow handle, and rag it clean use a cloth.
Step 3
Reinsert the clean Gauge into the transmission until it stops. to leave it to sit momentarily, and then to remove it once more.
Step 4
Check the level. The fluid would have be enter the inferior and Superior marks pressing in the dipstick. If not, you need add transmission fluid.
Step 1
Place a funnel in the Gauge hole. This prevent transmission oil spills.
Step 2
Pour transmission oil downwards the funnel in small increments. to be added a large quantity at one time could result in an overfill.
Step 3
Allow the oil to bench on file for a few seconds each one time you add oil. Then to remove the funnel and reinsert the Gauge to Control the oil level.
Step 4
Insert the Gauge all the way. Once the transmission oil is enter the high and low marks as shown on the dipstick, reinsert the dipstick, manufacture sure it adjustments securely in the Gauge tube.
