Step 1
Bring your owner's handbook to an Automatic shop to buy the right-hand side replacement bulb. The helps will helps you lucky find the correct model.
Step 2
Turn off the car and expenses the engine. Even Although the headlight assembly isn't afterwards to the engine, it's end enough that you could get scalded if you're careless. Better to makes an attempt till the engine is expenses to to start work.
Step 3
Locate the bolts possession the headlight in place. Use your 10 mm Casing wrench to to remove the bolts afterwards to the headlight and above it. There be three.
Step 4
Pull the headlight housing as far towards you as you can. Even with the bolts removed, it won't come out completely, and it may not even to move at all. Slip your screwdriver enter the headlight housing and the car. Use some force to pry off the headlamp, which reveal a Pin and Casing holding the housing to the car.
Step 5
Pull the headlight housing far from the car, being careful not to scratch the painting or your bumper.
Step 6
Unplug the Wire from the headlight.
Step 7
Unscrew the two Screw in the headlight that to give you access to the headlight bulb. It's held in place by a Fastens that can be released when you compression on two tabs.
Step 8
Insert your new headlight bulb in the Casing and To connect the Wire to it. Turn the car on and to make sure the light bulb work before you to attach the headlight to the car. If the bulb works, To disconnect the Wire and to attach the Fastens and the screws. to follow the precedent steps in opposite in order to put the headlight housing assembly back on the car.
