Step 1
Turn the Fenestrate crank handle to bread the Fenestrate all the way down. Pay end attention to the position of the handle; you'll the need to to install the new handle in the same position.
Step 2
Insert the Fenestrate crank tool under the part of the button attached to the Carry panel. to refer to the Resource section for a photograph of the adapted position, if necessary.
Step 3
Push the tool forwards with moderate force to release the Fenestrate crank clip. In majority cases, the Fastens will Arises forward. Do not to lose the clip; if your replacement Fenestrate crank handle Fact not come with a new clip, you'll the need the old Fastens to to install the new handle.
Step 4
Gently traction the old Fenestrate crank handle far from the panel. With the Fastens removed, it simply slides off.
Step 5
Attach the new Fenestrate crank handle to the metal knob, in the same position the old one was in Front you removed it.
Step 6
Slide the Fastens underneath the Fenestrate crank handle, and around the metal knob. The opened end of the Fastens needs to be coating the same direction it was before to removal, so you'll the need to attaches it to the opposed side you removed it from.
Step 7
Insert the Fenestrate crank tool against the clip; pushed it firmly to attaches it to the metal knob. insertion the tool in the opposed side you used to to remove the clip. You'll to hear a light "snap" as the Fastens hooks in the notches along the metal knob; when this happens, the installation is complete.
