Step 1
Visually To inspect the Girdle tensioner for deviation of alignment caused by a carried spring loading mechanism. This condition is obvious at the pivot not of the tensioner, and the separation of the two halves of the tensioner can be easily considering with the naked eye.
Step 2
Check Arises loading of the Girdle by glance at the tension Measure cast in the two halves of the tensioner. The interior piece have two arrows Cast iron into the metal, and the external piece have one arrow Cast iron into the metal. The external arrow would have point enter the two interior arrows. If the arrows are not striped up properly, To replace the belt.
With a 15mm wrench, Control the tensioner for binding. If the tensioner is released and Fact not return to its original position, To replace the tensioner.
Step 3
Remove the Girdle by compression the tensioner and Slip the Girdle off the pulley. rotation the pulley while listen and feeling for roughness. Any rough noise or vibration be amplified when the pulley is under tension. To replace the pulley if Those symptoms occur.
