Step 1
Open the cap and to remove the Conservation screws that catch the headlight housing to the braces using a screwdriver.
Step 2
Slide the housing forward.
Step 3
Unplug the machine power connector of the back of the headlight ballast and to remove the machine headlight assembly.
Step 4
Plug the machine power connector in the back of the Halation headlight ballast and blocked the Halation assembly to the braces of the Mustang use the machine retaining Screw and a screwdriver.
Step 1
Slide the tip of the DIN tools in the access slits on one or the other side of the Ford Mustang's radio. The DIN tools to look at like small horseshoes, or "U"s. The ends of the "U" slide in the access holes. There are two of they on each one side of the radio.
Step 2
Pull out on the DIN tools to to apply outward pressure on the tools.
Step 3
Pull the radio out of the dash.
Step 4
Disconnect the élém. élect. connector of the back of the radio. Then, disconnection the antenna catch from the back of the radio.
Step 5
Connect the antenna and élém. élect. connector to the new radio and to install the radio. Installation is the opposite of removal.
