Step 1
Connect the wiring harness to the back of the sealed-beam headlight assembly by pressing it directly into the connector until the Conservation clips lock in place.
Step 2
Position the Conservation ring on the front of the headlight assembly and insertion the two Screw required to blocked it. to tighten the Screw with a Philips screwdriver. to install the headlight bezel to the front of the headlight assembly and blocked it with the two screws, tightening they with a Philips screwdriver.
Step 3
Repeat the process for the headlight assembly on the opposed side. Test the lights to to ensure that they are operation properly.
