Step 1
Using a screw driver to remove four Philips head Screw on the four corners of the face of the parking light.
Step 2
Pull parking light out. to turn parkign light forwards to see the back of the parking light. to insert thumb locks, torsion and traction two bulbs out.
Step 3
At this not you can service the bulbs if you the need to or To replace the entirety parking light itself.
Step 4
Re -install parking light by to reverse the process.
Step 5
Place bulbs in place, torsion and pushed until inch locks click.
Step 6
Put the parking light in its place.
Step 7
Thread the four Philips head Screw into their screw holes and to tighten with a screwdriver. The Screw do not to have to be excessively tight. The parking light objective is plastic and you don't to want you to slit it by tightening the Screw too much.
