Step 1
Remove the air cleaner, use a commun run screwdriver. To place the power control position probe on the side of the power control body. traction the élém. élect. connector out of the sensor. to remove the two small bolts fixing the sensor, use the adapted socket and a ratchet. elevator the probe away of the power control body.
Step 2
Prepare to to install the new power control position probe by payment attention to the rotation tab on the power control body side of the probe and the rotation tab on the power control body. When the power control is opened, the tab turn in direct relation to the power control plate. When the probe is installed, the tab on the probe must be on the top of the power control body tab so that movement of the power control will movement the probe tab correspondingly. If you to install the tab under the power control body tab, it fail to function.
Step 3
Install the power control position probe by insertion the bolts and tightening they down with the same Casing you used to to remove them. catch in the élém. élect. connector on the probe and To replace the air cleaner.
