Step 1
Check the power Twist if the printer not start. to make sure it is connected into a operation outlet. control the USB cable to to make sure it is firmly attache to the computer and to the printer USB port.
Step 2
Print a nozzle control pattern if colors are badly or impression is blurred. opened the "Printer Properties" menu by to click "Print" and "Properties" in any application. Click "Maintenance." Click "Nozzle Check." to inspect the model printed at the top of the page for any to miss lines. to inspect the models on the bottom of the page for unevenness.
Step 3
Clean the copy head if there were to miss lines in the nozzle control pattern. Click "Maintenance" on the "Printer Properties" menu. Click "Cleaning." Click "OK" on the confirmation screen.
Step 4
Align the copy head if there is unevenness in the nozzle control patterns. Click the "Maintenance" tab on the Printer Properties screen. Click "Print Head Alignment." Click "OK" on the confirmation window. to examine the printout. chosen the majority even models in each one column. Click "OK."
Step 5
Increase the copy quality arrangements if colors are striated or uneven. Click the "Main" tab of the Printer Properties screen. Click "High" under "Print Quality."
Step 6
Check for paper jams if a copy job stops front it is completed. Slowly Traction the paper out of the driver or output slot. opened the front cover if the paper tears. to remove the piece that remainders inside the printer. end the front cover.
Step 7
Replace the ink cartridges if a "Low Ink" warning is shown on the screen when printing.
