Step 1
Redistribute the to thunder by elimination the cartridge and wiggling it gently of back to front. If the cartridge is depleted, to replace it. rag the old cartridge with a lint-free cloth. to make sure you to have removed any bandage from a new cartridge front placing it inside the printer.
Step 2
Follow standard cleaning procedures. First, To disconnect the printer, then to remove the to thunder cartridge. rag down the printer chemin with a lint-free cloth. Use the fabric to rag out the to thunder cavity (the space inside the printer where the to thunder cartridge fits), then to reintegrate the to thunder cartridge.
Step 3
Make sour the paper you are use is the correct type. If the paper is too rough or is not meant for use with your printer, you are probably to experiment printing issues.
Step 4
Adjust the to thunder density arrangement on the printer's order panel. You can access this arrangement by pressing the menu key on the front of the printer. You can lucky find the completely menu in your printer's manual.
Step 5
Clean the Intern mirror by Soufflement canned air through the printer itself. Canned air is simply a pressurized aerosol can which blows air forcefully enough to to remove dust and debris, but not badly your electronics equipment. Paper dust and to thunder can bench on file on the mirrors and lasers, to cause printing issues.
