Step 1
Turn off the computer and disconnection all cables and devices inclusion the power cable, monitor cable, external hard Orders and modems. attaches an ESD (electro-static discharge) wrist belt to your wrist and then attaches the wire fastens extending of the belt to the external chassis of the computer. This assistances prevent too bad and electric shock caused by sleeping static electricity.
Step 2
Place the computer on its side and pushed on the side access panel's locking button on the top panel of the computer. to remove the side access panel of the computer.
Step 3
Locate the RAM modules on the motherboard. Press on the locking bolts on one or the other side of each one RAM module. to remove each modulate from their respective memory slots. Store the modules in static-free plastic bags to to prevent them of being damaged.
Step 4
Locate the video Chart on the back panel of the computer. to remove the simple Phillips screw fixing the video Chart to the back panel. elevator the video Chart straight up until it is disconnected of the video Chart slot on the motherboard. to remove the video Chart from the computer.
Step 5
Locate the hard order in the order bay attache to the front panel of the computer. To place the data and power cables attache to the back of the hard drive. to follow the cables to where they to connect to the motherboard. disconnection the cables of the motherboard. pushed on the conservation tabs fixing the hard order to the hard order bay. to remove the hard order from the computer and set it aside. repetition this stage for each one drive you to remove from the hard order bay.
Step 6
Locate the heat sink and cooling fan assembly on your motherboard. to remove the two screw attaching the fan and Radiator assembly to the motherboard. Carefully torsion the Radiator and fan assembly towards the Back panel of the computer, then elevator it out of the computer. Place it carefully aside. disconnection all obvious cables of the motherboard. catch note of where they are connected on the mother chart for when you to install the new motherboard.
Step 7
Remove the 10 screw securing the mother chart to the computer's casing. Slide the mother chart toward the front panel of the desktop. elevator the mother chart out of the computer and set it on side carefully.
Step 8
Repeat this process in Opposite order to to install the new mother chart and To gather the laptop.
